Shop

Power Supply Unit- CAGED

Meanwell Power Supply – Caged 12VDC 150W CV

Description

This Power Supply – Caged & LED Friendly is one of 4 styles of 12 Volt DC electronically regulated power that we stock. This model is the switching type unit meaning it can be used as an LED Driver.  We also stock switching type Wall adapters and Waterproof Power Supply Units that are all LED friendly.  All Power Supplies /Adapters/Drivers sold by us comply with the Australian Safety Standard.  They are all suitable for use with our 12 Volts LED range. When we sell you LED products, we can match your purchase to the most suited LED friendly Power Supply.

Constant Voltage LED Drivers are rated at a specific current draw, but, this denotes their max performance and they work most efficiently when loaded at between 75-85% of their rated current draw. They are NOT designed to work at full load continuously. If overloaded, they will overheat, and switch themselves off.

Caged type Power Supply units are for indoor use only. This unit is designed for maximum heat dissipation and must be installed by a suitably qualified tradesperson. It has two output connections allowing for parallel circuits to be run.

When you purchase any LEDs from us, we will also advise on the most suitable LED friendly Driver.  For access to our LED range- please click here: LED strips and Modules

Australian Standards Approved, switching type– 12VDC 12.5Amp (150 W)

Specifications: POWER SUPPLY UNIT SPEC SHEET SLA