LED MODULE- DOUBLE SIDED LIGHT BOX
For Double sided Light boxes more than 15cm deep, this is our most cost effective way of lighting them
This Lightbox LED Module is a stand out in this area. It was designed specifically for Edge Lighting 15cm plus – double sided lightboxes. This is our second generation of Light box LED Module that we have marketed over the last 5 years, and it uses the latest in innovative circuitry to achieve a 110 percent efficiency. We have literaly sold 10s of thousands and never had a reported failure.
It measures 70mm X 30mm. it is Waterproof, produces 280 Lumens with a lense projecting light at 65 X 12 degrees.
This Lightbox LED Module bounces light off the opposing edge, before hitting the surface. It can be used for most applications.
For a quote, (including the correct LED Driver) please provide the light box diamensions: Length, height and depth.
If your Light box is Single sided, this is not the best option: Click here for the best option: https://www.signlighting.com.au/product/led-module-single-sided-light-box/
Or you can call us. 07 5564 9930. We will not only sell you the specific quantity that you require, we will also pre-wire the harnesses, solder all joints so that the install couldn’t be simpler- all for free.
This LED is configured in such a way that it MUST always be used in groups of three (3)
The formula for working out the qty required is as a general Rule:
For Light Boxes less than 600mm high:
Apply LEDs Top OR bottom only- 150mm spacing for single sided- 125mm spacing – double sided
For Light Boxes between 600mm and 1.0 m high:
Apply LEDs Top AND bottom – 150mm spacing for single sided- 125mm spacing – double sided
For Light Boxes more than 1.0 m high:
Apply LEDs Top, Bottom, and Both Ends 150mm spacing for single sided- 125mm spacing – double sided
For full specifications please clicke here: Spec sheet 7030W1B
Once you know how many Modules you need, to determine what size Power Supply you require to run them, Simply click here: LED to power pack spreedsheet