LED STRIPS – Rigid – SUPER BRIGHT SERIES
Chips are mounted on FB4 Fiberglass to provide the best reliability we can manufacture, with NO solder pads on the underside so they can safely be mounted on metallic surfaces.
We manufacture our own range of Super Bright Rigid LED strips because they are more reliable than flexible strip lighting. Our Super Bright series of NONwaterproof LEDs were developed for commercial applications where failure and poor performance are undesirable. Manufactured to the highest standard, which we set using FR4 because of its superior reliability, in conjunction with no solder points on the underside. This ensures no short circuit failures, which is the most common LED strip problem.
Soldered joints are the most reliable way to join LED strips. Therefore all of our strips have a tail and one end and pre-tinned solder pads at the other. This means joining them is a quick, simple, and reliable process. They are engineered to be soldered together, with as many as 8 in series without notable voltage drop. All of our Rigid LED Strips are also supplied with 3M high-performance adhesive so that they stay stuck, where you stick them.
10 different colored LED rigid strips and a color-changing LED strip are all available in this range. Each strip is 500mm long and can be cut every 5cm, or 3 chips. For pictures of these strips in use- check out our FB page
We don’t buy on Price and nor should you
All Rigid Super Bright strip is 10mm Wide X 500mm long
Each strip has 30 X 5050 Epistar chips – 60 per meter
They can be cut every three chips, and soldered together for longer applications
For full specifications: Spec sheet- Rigid strips