LED MODULE- for EDGE-LIGHTING lightboxes
Our most cost-effective way of lighting a double-sided lightbox
Description
Our LED Module for DOUBLE SIDED Light boxes is a stand-out in the sign industry. It is designed and engineered for reliably Lighting a double-sided lightbox. This second-generation side-mounted Lightbox LED Module keeps us abreast of the latest technology. It is ideally suited to lightboxes between 15cm -25cm deep (between the two signage surfaces).
Waterproof to IP 65 rating, it produces 280 Lumens of clean white 6000k light. It’s lens projects the light in a very narrow beam so that it bounces light off the opposite side, before hitting the sign surface. It is secondary light that is better defused, hitting the sign surface. Primarily used for new installations, it can also be used for refurbishing most older double-sided lightboxes. If your Lightbox is Single-sided, or you are retrofitting an existing lightbox that still requires the internal framing used for the fluoro tubes, for structural reasons, you should consider using our single-sided option back to back. For more info – click here
Email us the lightbox dimensions: Length, height, and depth and we will work out your requirements, including matched Power supply. We only sell you the specific quantity that you require, we will also pre-wire the LED harnesses, including soldering the joins, including the layout plan so that the installation is simple- all for free.
Or call us: 07 5564 9930. We have literally sold 10s of thousands of this LED Module for DOUBLE SIDED Light boxes and never had a reported failure. To follow new product releases click to our FB page
Additional Information:
For full specifications please click here:7030W1B SPEC SHEET SLA
This LED is configured in such a way that it MUST always be used in groups of three (3)
The formula for working out the qty required is as a general Rule:
For Light Boxes less than 600mm high:
Apply LEDs Top OR bottom only- 150mm spacing for single-sided- 125mm spacing – double-sided
For Light Boxes between 600mm and 1.0 m high:
Apply LEDs Top AND bottom – 150mm spacing for single-sided- 125mm spacing – double-sided
For Light Boxes more than 1.0 m high:
Apply LEDs Top, Bottom, and Both Ends 150mm spacing for single-sided- 125mm spacing – double-sided
