Chips are mounted on FB4 Fiberglass to provide the best reliability we can make.


We manufacture our own range of LED Strips Rigid – Economy, because they are more reliable than flexible strip lighting.  Our Economy series of NONwaterproof LEDs were developed for commercial applications where failure and poor performance are undesirable. Manufactured to the highest standard, which we set using FR4 because of its superior reliability.

Soldered joints are the most reliable way to join LED strips.  Therefore all of our strips have a tail and one end and pre-tinned solder pads at the other.  This means joining them is a quick, simple, and reliable process.  They are engineered to be soldered together, with as many as 8 in series without notable voltage drop.  All of our Rigid LED Strips are also supplied with 3M high-performance adhesive so that they stay stuck, where you stick them.

5 different colored LED rigid strips complete this range.  Each strip is 500mm long and can be cut every 5cm, or 3 chips.  For pictures of these strips in use- check out our FB page

Colored strips use an Epistar 3528 LED chip X 30 per strip. Colored strips can be cut/soldered every 5cm or 3 chips and up to 8 strips in series.

White strips (6000k) use an Epistar 5050 LED chip X 15 per strip. The White strips can be cut/soldered every 10cm, or 3 chips, and up to 8 strips in series

Our Economy range of Rigid LED strips are manufactured to the highest standards and that’s why they are supported with a 5-year warranty.

If you requirer Brighter LED Strip lighting, then please refer to our Super Bright Range

We don’t buy on Price, and nor should you

They measure 500mm X 10mm long with 30 X 3528 diode LEDs per 500mm for the colored strips

They can be cut every three chips, and soldered together for longer applications

For specifications: Spec sheet- Rigid strips

Call Now ButtonCall Now